Bridge Deck Overlays
With one coat of FlexPrime and two FlexKrete broadcast applications, this bridge deck was sealed and refurbished in less than a day.
|
Large Entryways
This was a single coat application with fine sand, top-coated with FlexSealer 1000. Additionally, the exposed aggregate was having to be re-sealed every year - so FlexSealer 1000
was used instead, to provide a much longer lasting finish.
|
Small Entryways and Non-Skid Ramps
This business owner had a puddle at his entryway, so a thin coat of FlexKrete trowel mix was applied to bring it up to grade, then a double broadcast of red quartz was applied to provide a durable non-skid surface.
|
Non-Skid Metal Pan Stairs
The edges of metal pan stairs are very slick, and FlexKrete bonds superbly to metal. This application was using standard sand, but then top-coated with a pigmented version of our FlexSealer 1000.
|
Non-Skid Concrete Steps
As you can see, FlexKrete can be broadcast even on vertical faces of the stairs.
|
Non-Skid Tile Overlays
This client had some very slippery and broken tile, as well as, a new adjoining slab they wanted to color match.
The damaged tile was removed and filled flush to grade with FlexKrete slurry,
then a double broadcast of medium grade sand was applied with a clear FlexSealer 1000 top-coat.
|
Renew Old Pool Decks
This cracked and pitted pool deck needed a decorative non-skid finish. After repairing the cracks and pits with a FlexKrete mixture, a coat of FlexKrete was applied with a broadcast application of blue-gray quarts and a topcoat of our FlexSealer 1000.
|
Maintenance Free Helicopter Pads
This helicopter pad had been painted less than 8 months previously and was in sad shape
from Texas sized UV rays. A FlexKrete and quartz broadcast was applied for the three separate colors.
Quartz colors resist bleeding or fading, even when exposed to harsh sunlight, and power washing. This flexible, long-lasting surface will guarantee a permanent colored, UV stable finish
that will look stunning for years - with low to zero maintenance.
|
Non-Skid Waterproofing for Apartment Landings
These 20 apartment complex landings were refitted with new concrete due to rusting metal that was repaired. They wanted to ensure a non-skid surface that was durable and cosmetically appealing,
as well as for waterproofing / watersealing.
This landing restoration took about 1 hour from start to finish.
THE PROCESS: 1. Scarify Surface 2. Apply FlexPrime (4 oz total for this
13sf) 3. Apply FlexKrete (less than 1 quart) and broadcast with blasting sand
4. Broom off all loose sand 5. Seal with FlexSealer1000.
|
|